Surface Tension Converter
Convert surface tension across 5 supported units with free instant calculations, formula guidance and examples. No sign-up required.
Calculations run in your browser. Results use approximately 12 significant digits, with floating-point rounding. Verify safety-critical measurements against applicable standards.
About Surface Tension conversion
Convert between 5 surface tension units, including N/m, mN/m, dyn/cm, N/cm, lbf/ft. Results update immediately when you edit the number or select another unit.
Use the exact unit labels: US and imperial variants are not always interchangeable.
Example calculation
1 N/m = 1,000 mN/m. For linear quantities, multiply the source amount by the ratio of the two fixed reference-unit factors.
How to use
- Enter your amount in the field above.
- Select the original and destination surface tension units.
- Copy the calculated result or swap the units to reverse the conversion.
Frequently asked questions
Can I convert surface tension units for free?
Yes, the calculation runs locally in your browser with no sign-up.
Which units are supported?
This category currently includes 5 entries. Select the units from the dropdowns above.
Are the results suitable for professional use?
Use the exact unit labels: US and imperial variants are not always interchangeable. Check critical work against an applicable standard.
Related conversions
Volume Flow Rate · Mass Flow Rate · Molar Flow Rate · Dynamic Viscosity · Kinematic Viscosity · Mass Flux
Unit definition reference: NIST Guide to the SI.